INSTALLATION
14
Removing the Mounting Bracket / iPlayer 3 Assembly
To remove the mounting bracket/iPlayer 3 assembly from the
mounting surface installed with locked mounting, remove the
screws installed in step 3 above.
To remove the iPlayer 3 from the mounting bracket installed
with quick-release mounting, press on the release tab and push
the iPlayer 3 upward.
Connecting and Setting Up the iPlayer 3
The following sections describe how to set up the iPlayer 3 in
each mode of operation. Subsequent chapters provide more
details.
Setting Up the iPlayer 3 in USB Mode
USB Mode is used to transfer data to and from the iPlayer 3’s
associated ColorPlay 3 software tool on your PC/Mac.
To Next Page
Loading...
