What to do if my Philips KV-S5055C Barcode Reader has no power?
If your Philips Barcode Reader isn't getting power, try these steps: Ensure the power cord is correctly inserted. Check that the cables in the scanner, especially around the POWER Board, are properly connected. Also, verify the USB cable between your PC and the scanner.
Why does my Philips Barcode Reader document skew or crease when scanning?
If documents skew or crease while scanning with your Philips Barcode Reader, it might be due to several reasons: The document guides may not be set correctly for the document size on the Hopper Tray. The rollers could be dirty or not properly attached. Clean the rollers or reassemble them correctly. If the rollers are worn out, consider replacing them.
What to do if my Philips Barcode Reader scanned image has black or white lines?
If your Philips Barcode Reader is producing scanned images with black or white lines, it could be due to dust on the Scanning Glass (F) or Scanning Glass (B). Clean the glass surface. Another cause might be dust on the CCD lens inside the Scanning Glass (F) or (B); remove the glass and clean the lens.
General| Brand | Philips |
|---|---|
| Model | KV-S5055C |
| Category | Barcode Reader |
| Language | English |
To Next Page
