Philips LC7.1E LA - Page 11

Mechanical Instructions
EN 11LC7.1E LA 4.
Figure 4-7 Side I/O module
Figure 4-8 Side I/O panel [1/3] top side
Figure 4-9 Side I/O panel [2/3] bottom side
Figure 4-10 Side I/O panel [3/3]
4.3.4 IR/LED Panel
1. Remove the rear cover, as described earlier.
2. Refer to fig. "IR/LED panel" below.
3. Unplug connector(s) [1].
4. Release clip [2] and remove the board.
When defective, replace the whole unit.
Figure 4-11 IR/LED panel
G_16860_066.ep
s
01020
7
a
b (1x)
b (1x)
G_16860_075.eps
010207
c
G_16860_076.eps
010207
2d
2e
G_16860_077.eps
010207
2
g
f
G_16850_009.eps
110107
1
2