Philips LFH9750 - Hands-Free Recording; Record with the Microphone LFH0276;0278; Record a Spoken Instruction

12 User manual
5.2 Record with the microphone
LFH0276/0278
1 A memory card must be inserted into the
memory card slot and the microphone must
be connected to the Digital Desktop.
2 To start recording:
• On the microphone LFH0278, move the
slide switch to the
REC position and start
speaking.
• On the microphone LFH0276, press the
REC button, move the slide switch to the
(play) position and start speaking.
3 To stop recording:
• On the microphone LFH0278, move the
slide switch to the
STOP position.
• On the microphone LFH0276, move the
slide switch to the
(stop) position and
press the
REC button.
4 Press the
L/P button to lock the file and
mark it as finished (EOL/end-of-letter).
The  symbol is displayed and the Digital
Desktop automatically creates a new,
empty file. To assign priority status to the
recording, press the
L/P button again within
half a second. The
! symbol is displayed,
indicating that the file has priority status. To
make changes to the recording, press the
L/P
button again to remove the finished mark.
D Note
• For best results, speak clearly and keep
the microphone about four inches (ten
centimeters) away from your mouth.
• Press the
S button during recording to insert
an index mark.
• Files are recorded in overwrite mode by
default. See Menu settings on page 9 for
more information about switching to insert
recording mode to make additions to a
recording.
• Press and hold the
S button during recording
to record a spoken instruction. See the next
chapter for more information.
5.2.1 Record a spoken instruction
Spoken instructions are recorded comments
by the author that are directed to the person
transcribing the dictation.
To insert a spoken instruction into a recording:
1 Press and hold the
S button while recording.
2 Dictate the instruction.
3 Release the
S button when the spoken
instruction is complete. The spoken
instruction is displayed as a solid line on the
file position bar.
5.3 Hands-free recording
In this operating mode, you can control the
dictation functions with the foot control to
keep your hands free for your work.
1 Connect the plug of the foot control to the
foot control socket of the Digital Desktop.
2 Set the switch on the underside of the foot
control to the T position.
3 Option A: Connect the microphone
LFH0276 or LFH0278 (optional) to the
MIC
socket of the Digital Desktop. Press and
hold the
REC button on the microphone