Philips MC235 User Manual

16
3140 115 xxxxx
English
Clock/Timer
Setting the clock
1 In standby mode or system on, press and hold
CLOCK SET on the remote control for more
than 3 seconds.
➜ SET CLOCK scrolls on the display.
➜ The clock digits for the hours flash.
2 Press VOLUME +/- to set the hours.
3 Press CLOCK SET again.
➜ The clock digits for the minutes flash.
4 Press VOLUME +/- to set the minutes.
5 Press CLOCK SET to confirm the time.
Viewing the clock
Press CLOCK SET .
➜ The clock time is displayed.
Setting the timer
● The system can be used as an alarm clock,
whereby the CD, TUNER is switched on at a set
time. The clock time needs to be set first before
the timer can be used.
● During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1 In standby mode or system on, press and hold
TIMER on the remote control for more than 3
seconds.
➜ SET TIMER and SELECT SOURCE scrolls
on the display.
2 Press SOURCE or VOLUME +/- to select
sound source.
➜ Display sequence shows CD, TUNER.
➜ flashes.
3 Press TIMER to confirm your desired mode.
4 Press VOLUME +/- to set the hours.
5 Press TIMER again.
➜ The clock digits for the minutes flash.
6 Press VOLUME +/- to set the minutes.
7 Press TIMER to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
● Press TIMER on the remote to turn off the
timer or turn on to the last setting again.
➜ If activated, the timer information will display
for a few seconds, then the system resumes to
the last active source or stays in standby mode.
➜ If deactivated, “OFF” appears.
Note:
– The system will exit timer setting mode if no
button is pressed within 90 seconds.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
● Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP and
one of the sleep time options
in sequence: 90, 75, 60,...,
45,30,15, OFF, 90. if you have
selected a time.
● To deactivate, press SLEEP on the remote
control once or more until OFF is shown, or
press STANDBY-ON on the system or
remote control.
➜ SLEEP disappears.
pg001-017_MC235B_37_Eng 9/2/07, 13:4516

Philips MC235 Specifications

General

Display type	LCD
Backlight color	Blue
Backlight display	Yes
Apple docking	No
Headphone connectivity	3.5 mm
Playback modes	Program, Repeat, Shuffle
Channels quantity	40 channels
Disc types supported	CD, CD-R, CD-RW
Audio formats supported	-
FM band range	87.5 - 108 MHz
MW band range	531 - 1602 kHz
Supported radio bands	FM, MW
Preset stations quantity	40
Impedance	4 Ω
Speaker type	2-way
Frequency range	63 - 16000 Hz
RMS rated power	10 W
Woofer diameter	76 mm
Number of speakers	2
Signal-to-Noise Ratio (SNR)	62 dB
Peak Music Power Output (PMPO)	400 W
Type	Home audio micro system
Product color	Grey, Silver
Disc loading type	Front
Network integrated ports	3.5mm stereo line in
Power source	AC
Input voltage	220-240 V
Input frequency	50 Hz
Power consumption (standby)	4 W

Weight and Dimensions

Depth	96 mm
Width	250 mm
Package depth	300 mm
Package width	328 mm
Package height	313 mm
Package weight	5300 g
Main speaker width	166 mm
Main speaker height	245 mm