21
English
[Auto] - For TV that is compatible with
both PAL and NTSC.
[NTSC] - For TV with NTSC color system.
[Audio]
Select the preferred audio language for disc play.
[Subtitle]
Select the preferred subtitle language for disc
play.
[Disc Menu]
Select the preferred disc menu language.
Note
If the language you have set is not available on the disc,
the disc uses its own default language.
For some discs, the subtitle/audio language can only be
changed from the disc menu.
[Parental]
Restricts access to discs that are unsuitable for
children. These types of discs must be recorded
with ratings.
Press OK.
Select a rating level, then press OK.
Press the numeric keys to enter the password.
Note
Rated discs above the level you set in [Parental]
require a password to be played.
The ratings are country-dependent. To allow all discs to
play, select [8 ADULT].
Some discs have ratings printed on them but are not
recorded with ratings. This function has no effect on
such discs.
Tip
You can set or change the password. (See “Preference
setup - Password setup”.)
[Default]
Resets all the settings of this unit to factory
default, except for the password and parental
settings.
movies at a low volume, without disturbing
others.
[On] – enjoy quiet viewing at night (DVDs
only).
[Off] – enjoy surround sound with its full
dynamic range.
Video setup
On [Video Setup Page], you can set the
following options:
[Component]
Set the video output according to the video
connection. If the composite connection is used,
this setting is not required.
[CVBS] – If the S-Video connection is
used, select this option.
[Pr/Cr Pb/Cb Y] – If the component
connection is used, select this option.
[S-VIDEO]– If the S-Video connection is
used, select this option.
[TV Mode]
Select the video output mode. To select the
progressive scan mode, ensure that you have
connected a progressive scan TV and set
[Component] to [Pr/Cr Pb/Cb Y].
[Progressive] – For progressive scan TV:
turn on the progressive scan mode.
[Interlace] – For ordinary TV: turn on the
interlace mode.
[Picture Setting] > [Picture Setting Setup]
Customize picture color settings.
Preference setup
On [Preference Page], you can set the following
options:
[TV Type]
Change this setting if the video does not appear
correctly. By default, this setting matches the
most common setting for TVs in your country.
[PAL] - For TV with PAL color system.
EN
To Next Page
Loading...
