24
9 Other features
Activate demonstration mode
You can see an overview of all features.
1 In the standby mode with clock display (if
set), press
on the main unit to activate
the demonstration mode.
» A demonstration of major available
features starts.
To deactivate the demonstration mode:
1 Press on the main unit again.
Adjust brightness of display
panel
1 In standby mode, press MODE/DIM
repeatedly to select different levels of
brightness for the display panel.
Set the alarm timer
1 Ensure that you have set the clock
correctly.
2 In standby mode, press and hold SLEEP/
TIMER.
» The hour digits are displayed and begin
to blink.
3 Press + VOL - to set the hour.
» The minute digits are displayed and
begin to blink.
4 Press SLEEP/TIMER
5 Press + VOL - to set the minute.
6 Press SLEEP/TIMER
7 To activate the wake-up timer, press + VOL
- to select [ON] (on).
» A clock icon appears on the display.
Select automatic loudness control
Automatic loudness control increases the treble
and bass effect at low volume levels (the higher
the volume, the lower the treble and bass
levels).
1 To turn on automatic loudness control,
press LOUD/DBB during play until the
loudness icon is displayed.
To turn off automatic loudness
control, press LOUD/DBB until the
loudness icon disappears.
Mute sound
1 During play, press MUTE to mute/unmute
sound.
Listen through headphone
1 Plug a headphone into the socket on the
unit.
EN
To Next Page
Loading...
