EasyManua.ls Logo

Philips MCD183 - Video, Audio, and Mute Interfaces

Philips MCD183
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
7 Tune to FM
radio stations
1 Ensure that you have connected and fully
extended the supplied FM antenna.
2 Press TUNER.
3 Press and hold / .
4 When the frequency indication starts to
change, release the button.
» The FM tuner tunes to a station with
strong reception automatically.
5 Repeat steps 3-4 to tune to more stations.
To tune to a weak station:
Press
/ 
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset radio
stations.
1 Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO]
» All available stations are programmed
in the order of waveband reception
strength.
» 
broadcast automatically.
[Password Setup] > [Password Setup Page] >
[Password Mode]
This setting allows you to enable/disable the
password for parental control. If the password
is enabled, when you play a prohibited disc, this
4-digit password is required.
 [On] - Enable the password for parental
control.
 [Off] - Disable the password for parental
control.
[Password Setup] > [Password Setup
Page] > [Password]
You can change password here. The default
password is 1234.
 [Change]
1) Press the numeric keys to enter ‘1234’ or
your last set password at [Old Password]
2) Enter the new password at [New
Password]
3) Enter the new password again at &'#
PWD]
4) Press OK to exit the menu.
Note
If you forget the password, enter ‘1234’ before you set
a new password.
EN
All manuals and user guides at all-guides.com

Other manuals for Philips MCD183

Related product manuals