English
29
System Menu Options
Basic operations
1 Press SYSTEM MENU to enter the Setup
Menu.
2 Press 1 2 to select a page to be set.
3 Press 3 4 to highlight an option.
4 Enter its submenu by pressing 2 or OK.
5 Move the cursor by pressing 3 4 to highlight
the selected item.
➜ In cases of value setting, press 1 2 to adjust
values.
6 Press OK to confirm.
To return to the upper-level menu
● Press 1 or OK (in cases of value adjustment).
To exit from the menu
● Press SYSTEM MENU again.
➜ The settings will be stored in the player’s
memory even if the player is switched off.
Note:
– Some of the features in the System Menu
Options are described in “Getting Started”.
GENERAL SETUP PAGE
The options included in General Setup page are:
“TV DISPLAY”, “OSD LANGUAGE”, “SCREEN
SAVER”and “DIVX CODE”.
DIVX CODE
TV DISPLAY
Set the aspect ratio of the DVD Player according
to the TV you have connected.
➜ NORMAL/PS: If you have a normal TV and
want both sides of the picture to be trimmed or
formatted to fit your TV screen.
➜ 4:3 NORMAL/LB: If you have a normal TV.
In this case, a wide picture with black bands on
the upper and lower portions of the TV screen
will be displayed.
➜ WIDE: If you have a wide-screen TV.
OSD LANGUAGE
See “Getting Started-Step 3: Setting language
preference”.
SCREEN SAVER
This function is used to turn the screen saver on
or off.
➜ ON: In STOP, PAUSE or No DISC mode, if
no actions are performed about 3 minutes, the
screen saver will be activated.
➜ OFF: Screen saver is disabled.
pg 023-042_MCD710_12_Eng 2007.11.29, 14:2729
To Next Page
Loading...
