28
1 When the apparatus is turned on, press
SLEEP/TIMER repeatedly to select a set
period of time (in minutes).
When sleep timer is activated, the »
display shows
.
2 Press SLEEP/TIMER repeatedly until [--] is
displayed.
When sleep timer is deactivated, »
disappears on the display.
Listen to an audio device
You can listen to an audio device through this
apparatus.
1 Connect a 3.5mm audio cable (not
supplied) from the AUX socket to the
audio output socket audio device.
2 Press AUX.
3 Start to play the device (see the device
user manual).
9 Other features
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
Note
Ensure that you have set the clock correctly. •
1 In standby mode, press and hold SLEEP/
TIMER.
The hour digits are displayed and begin »
to blink.
2 Turn VOLUME+/- or press VOLUME+/-
on the remote control to set the hour.
3 Press SLEEP/TIMER to confirm.
The minute digits are displayed and »
begin to blink.
4 Turn VOLUME+/- or press VOLUME+/-
on the remote control to set the minute.
5 Press SLEEP/TIMER to confirm.
[ » OFF] (OFF) begins to blink.
6 Turn VOLUME+/- or press VOLUME+/-
on the remote control to select [ON]
(ON).
7 Press SLEEP/TIMER to confirm.
The timer is set and activated. »
To deactivate the timer
Select [• OFF] (off) in step 6.
If timer is activated, the display •
shows
.
If timer is deactivated, •
disappears
on the display.
Set the sleep timer
This apparatus can switch to standby
automatically after a set period of time.
EN
To Next Page
Loading...
