Philips MICRO MC147 - Playing a Disc; Powering On and Standby

12 EN
3 Press PROG repeatedly to select 12 hour
or 24 hour format.
4 Press CLOCK/DISPLAY
» The hour digits are displayed and begin
to blink.
5 Press / (or TUNING / on
the main unit) to set the hour.
6 Press CLOCK/DISPLAY
» The minute digits are displayed and
begin to blink.
7 Press / (or TUNING / on
the main unit) to set the minute.
8 Press CLOCK/DISPLAY
Tip
 To view the clock during play, press CLOCK/DISPLAY
repeatedly until the clock is displayed.
Turn on
1 Press POWER.
» The product switches to the last
selected source.
Switch to standby
1 Press POWER to switch the unit to
standby mode.
» The backlight on the display panel is
dimmed.
» The clock (if set) appears on the
display panel.
4 Play
Play disc
1 Press DISC to select the disc source.
2 Pull at PULL TO OPEN on the top panel
to open the disc compartment.
3 Insert a disc with the printed side facing up,
then close the disc compartment.
4 Press to start play.
 To pause/resume play, press
.
 To stop play, press
.
Skip to a track
1 During disc play, press / to select
another track.
Search within a track
1 During play, press and hold / .
2 Release to resume normal play.
Repeat play
1 During play, select a repeat play mode:
 To play the current track repeatedly,
press REPEAT on the main unit.
 To play all tracks repeatedly, press REP
ALL on the remote control.
2 To return to normal play, press REPEAT or
REP ALL again.