Philips MICRO MC147 - Listening to Radio; Tuning and Programming Radio Stations

14 EN
6 Listen to radio
Tune to a radio station
1 Press TUN to select radio source.
2 Press and hold / for more than 2
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
 To tune to a weak station, press
/

reception.
Program radio stations
automatically
You can program a maximum of 40 preset
radio stations.
1 In the tuner mode, press and hold PROG
for 2 seconds to activate automatic
program mode.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» 
broadcast automatically.
Program radio stations
manually
You can program a maximum of 40 preset
radio stations.
1 Tune to a radio station (see "Tune to a
radio station" section).
2 Press PROG to activate program mode.
» [PROG] blinks on the display.
3 Press PRESET +/- to allocate a number
to this radio station, then press PROG to

» 
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Tip
 To overwrite a programmed station, store another
station in its place.
Select a preset radio station
1 In tuner mode, press PRESET +/- to select
a preset number.
Tip
 Position the antenna as far as possible from TV, VCR or
other radiation source.
 For optimal reception, fully extend and adjust the
position of the antenna.