Philips P Series - Daisy-chain Configuration

43BDL3117P/50BDL3117P/55BDL3117P
23
4.2.3. Using DP input
PC
DP Out
[DP IN]
DVI-I
RS232
OUT
RS232
IN
DP IN
4.3. Connecting Multiple Displays in a Daisy-chain Configuration
You can interconnect multiple displays to create a daisy-chain conguration for applications such as a menu board.
4.3.1. Display control connection
Connect the [RS232 OUT] connector of DISPLAY 1 to the [RS232 IN] connector of DISPLAY 2.
DISPLAY 1 DISPLAY 2
PC
[RS232 IN]
[RS232]
[RS232 OUT] [RS232 IN]
4.4. IR connection
DISPLAY 1
[IR IN]
External
IR Receiver
NOTE:
This display’s remote control sensor will stop working if the [IR IN] is connected.