To Next PageTo Next PageWhat to do if my Philips PicoPix PPX 4935 only shows the initial screen when connected to my computer?
If the initial screen appears but not the image from your connected computer on your Philips Projector, ensure the cables are correctly connected to the right sockets and that the computer's resolution is set to 1280*720.
What to do if my Philips PicoPix PPX 4935 only shows the initial screen when connected to an external device?
If the initial screen appears but not the image from your external device on your Philips Projector, check that the cables are connected to the correct sockets. Also, ensure that the external device is switched on and its output is set to HDMI.
General| Display Technology | DLP |
|---|---|
| Light source | LED |
| Contrast ratio | 1000:1 |
| Throw Ratio | 1.2:1 |
| Internal memory | 8 GB |
| Integrated MP4 player | Yes |
| Integrated Office Viewer | Yes |
| Wireless screen mirroring | Yes |
| Wifi | Yes |
| Input Ports | HDMI, USB, Micro SD |
| Built-in Speaker | Yes |
| LED lifetime | 30000 hours |
| Lamp Life | 30, 000 hours |
| Bluetooth | Yes |
| Recommended use | Business |
| Power supply | AC 100-240V, 50/60Hz |
| Internal battery | Yes |
| Native Resolution | 854 x 480 pixel |
