What to do if my Philips PicoPix PPX3614TV/EU Projector switches to stand-by mode when connected to power?
If your Philips Projector is connected to the power supply and switches to stand-by mode, it might be due to the battery being in a deep discharge state. After charging for approximately five minutes, the device should turn on and be ready for use.
Why does my Philips Projector keep turning off?
If your Philips Projector device turns off because it's been running for a long time and has become too hot (a warning symbol might appear), it will automatically shut down. Allow the device to cool down before continuing playback. Also, ensure the device is connected to the power supply if the battery has insufficient capacity.
Why is the sound quality bad when connecting my computer to the Philips Projector?
If you are experiencing bad sound quality with your computer connection to the Philips Projector, ensure the audio cable is connected to either the computer's headphone socket or the line-out socket. Also, the volume setting on the computer should not be excessively high.
How to fix bad image quality on Philips PicoPix PPX3614TV/EU with HDMI?
If you're getting bad image or color quality when connecting your Philips Projector with HDMI, use the supplied HDMI cable (PPA1290). Third-party cables may cause signal distortions.
Why is there no sound from my external device on the Philips PicoPix PPX3614TV/EU?
If you're not getting any sound from an external device connected to your Philips Projector, try the following: * Check the cables connected to the external device. * Adjust the volume on the external device. * Ensure you are using the original cables from the device manufacturer, as others may not function correctly.
Why does my Philips PicoPix PPX3614TV/EU only show the initial screen with my computer?
If only the initial screen appears on your Philips Projector, and not the image from the connected computer, ensure that the VGA output of the computer is switched on and that the resolution of the computer is set to 800x600.
What to do if Philips PicoPix PPX3614TV/EU only shows initial screen?
If only the initial screen appears and not the image from the external device on your Philips Projector, check the following: * Ensure the cables are connected to the correct sockets. * Verify that the external device is switched on. * Confirm that the video output of the external device is activated.
How to reset Philips Pocket Projector when it's unresponsive?
To address an unresponsive or hung-up Philips Pocket Projector, insert a slim, pointy object into the reset hole to trigger a hardware reset.
How to turn on Philips Pocket Projector?
To resolve the issue of your Philips Pocket Projector not switching on, connect the supplied power supply to recharge the internal battery.
Why does my Philips PicoPix PPX3614TV/EU Projector dim when playing videos via USB?
If your Philips Projector device changes from maximum to minimum brightness when connected via USB to play videos, it may be due to a high environment temperature. Try using the device in lower environment temperatures.
General| Display Technology | DLP |
|---|---|
| Light source | LED |
| Native resolution | 854 x 480 pixels |
| Contrast ratio | 1000:1 |
| Aspect ratio | 16:9 |
| Focus adjustment | Manual |
| Integrated Media Player | Yes |
| Internal memory | 8 GB |
| Wireless screen mirroring | Yes |
| Bluetooth | Yes |
| Wi-Fi | Yes |
| Operating system | Android |
| Recommended use | Home entertainment |
| Integrated speaker | Yes |
| Weight | 0.5 kg |
| LED lifetime | 30, 000 hours |
| Connections | HDMI, USB |
| Battery | Built-in |
| Lamp Life | 30, 000 hours |
To Next Page