Philips PX840T - Advanced Playback Options; Controlling Playback; Programming Tracks; Sound Effect and Bass Enhancement

10 EN
5 Play options
Control play
In CD or USB mode, you can control play
through the following operations.
/ Press and hold to fast-forward
or fast-reverse the track during
playback, then release to resume
play.
-ALB/PRE/
ALB/PRE+
Skip to the previous or next MP3
album.
Start or pause play.
Stop play.
MODE [REP ONE]: Play the current
track repeatedly.
[REP ALBUM] (for MP3 tracks
only): Play tracks in the current
album repeatedly.
[REP ALL]: Play all tracks
repeatedly.
[SHUFFLE]: Play tracks randomly.
[OFF]: Resume normal play.
Program tracks
In CD or USB mode, you can program a
maximum of 20 tracks.
1 Press to stop playback.
2 Press PROG to activate the program
mode.
3 For MP3 tracks, press -ALB/PRE/ALB/
PRE+ to select an album.
4 Press / to select a track number,
then press PROGtoconrm.
5 Repeat steps 3-4 to program more tracks.
6 Press to play the programmed tracks.
• To erase the program, press twice.
Select a preset sound effect
The DSC (Digital Sound Control) enables you
to enjoy special sound effects.
• During play, press DSC repeatedly to
select:
• [ROCK]
• [TECHNO]
• [JAZZ]
• [POP]
• [SAMBA]
Enhance bass
During play, press DBB repeatedly to turn
dynamic bass enhancement on or off.