Philips Q549.2E LA - Wi-Fi Antenna; Set Re-Assembly

Mechanical Instructions
EN 14 Q549.2E LA4.
2009-May-08
Figure 4-10 LCD Panel -1-
Figure 4-11 LCD Panel -2-
4.3.9 Wi-Fi antenna
Follow the instructions for LCD Panel until “remove plastic rim”.
After removal of this rim, you gain access to the Wi-Fi
antennas.
4.4 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
• While re-assembling, make sure that all cables are placed
and connected in their original position.
• Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.
18310_217_090318.eps
090320
1
4
1
18310_218_090318.eps
090319
3
2