Philips S9731 - Cleaning the Shaver under the Tap

English
2 Remove the cleaning cartridge from the
SmartClean system and pour out any remaining
cleaning uid.
You can simply pour the cleaning uid down
the sink.
3 Throw away the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull o
the seal.
5 Place the cleaning cartridge in the SmartClean
system.
6 Push the top part of the SmartClean system
back down (‘click’).
Cleaning the shaver under the tap
Clean the shaver after every shave for optimal
performance.
Caution: Be careful with hot water. Always check
if the water is not too hot, to prevent burning
your hands.
Note: Never dry the shaving unit with a towel or
tissue, as this may damage the shaving heads.
1 Switch on the appliance.
52