Philips S9731 - Cleaning the Trimmer Attachment; Cleaning the Beard Styler Attachment

English
Cleaning the trimmer attachment
(S9552/26, S9552/12, S9551/26, S9551/12,
S9186/26, S9186/12, S9185/26, S9185/12
only)
Clean the trimmer attachment every time you have
used it.
1 Switch on the appliance with the trimmer
attachment attached.
2 Rinse the attachment under a warm tap.
3 After cleaning, switch o the appliance.
4 Carefully shake o excess water and let the
attachment dry.
Tip: For optimal performance, lubricate the teeth
of the attachment with a drop of sewing machine
oil regularly.
Cleaning the beard styler attachment
(S9732/33, S9731/33 only)
Clean the beard styler attachment every time you
have used it.
1 Pull the comb o the beard styler attachment.
Note: Grab the comb in the centre to pull it o
the beard styler attachment. Do not pull at the
sides of the comb.
2 Switch on the appliance.
3 Rinse the beard styler attachment and the
comb separately under a warm tap.
4 After cleaning, switch o the appliance.
5 Carefully shake o excess water and let the
beard styler attachment and comb dry.
54