Philips SBM120 - 3 Get Started; Power Supply; Turn On;Off; Select a Source

6EN
3 Get started
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
bottom of the apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Power supply
Caution
•
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Risk of damage to the speaker. Charge through the USB
socket of a computer only.
The speaker is powered by the built-in
rechargeable battery.
To recharge the built-in battery:
Connect the supplied USB cable to:
• the DC 5V socket on the speaker.
• the USB socket on a computer.
» The charging icon is displayed.
» When the battery is fully charged, the
charging icon disappears.
Turn on/off
1
Slide ON/OFF switch to right.
» The speaker switches to the last
selected source.
2 To turn the speaker off, slide ON/OFF
switch to left.
Select a source
Press S repeatedly to select an audio source: FM
tuner, Aux, USB device, or Micro SD card.