Philips SimplyGo Quick Start Guide

6. Set the flow rate.
To set the device’s flow setting, press
either the + or – button. To increase
the flow setting, press the + button.
To decrease the flow setting, press the
– button. The device can be set to 1,
1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, and 6
in Pulse or Sleep mode. SimplyGo can
be set to 0.5, 1, 1.5, and 2 in Continuous
Flow mode. Always verify the flow rate
when turning on SimplyGo.
To set up and use the mobile cart,
follow these easy steps.
1. Set the mobile cart on a level surface, hold the handle
with one hand, and open the base support.
2. With SimplyGo properly positioned in its carrying case,
place the device on the base of the cart and secure
using the elastic strap on the back of the case.
Mobile cart operation

Philips SimplyGo Specifications

General

Weight	10 lbs (4.5 kg) with battery
Dimensions	11.5 in x 10 in x 6 in (29.2 cm x 25.4 cm x 15.2 cm)
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Flow Settings	Continuous flow and pulse dose settings
Maximum Oxygen Output	2 LPM continuous flow
Power Source	AC, DC, or rechargeable battery
Operating Altitude	Up to 10, 000 feet (3048 meters)
Humidity Range	15% to 95% (non-condensing)
Charging Time	Approximately 2 to 3 hours