Philips SW100M - Rename Speakers

13EN
Option 4: Set up through a
PC/Mac (advanced)
1 Go to your Wi-Fi enabled PC/Mac.
2 Press and hold SETUP on the back of the
audio adapter for more than 3 seconds.
» Both the system status indicator on
the front panel and the Wi-Fi status
indicator on the SETUP button turns
solid amber.
3 Select :) Philips Setup from the list of
available Wi-Fi networks on your PC/Mac.
4 After successful connection, open a web
browser on your PC/Mac.
5 Enter http://philips.speakers or 172.24.0.1
at the address bar and click the Enter key.
6 Make changes on the setup page and
conrmyoursettings.
» The Wi-Fi status indicator on the
SETUP button turns off.
» The system status indicator on the
front panel turns solid green.
Rename speakers
1 After successful Wi-Fi setup, go to the
home page and tap the speaker icon on
the app screen.
2 Tap beside the speaker name.
3 Rename the speaker as you like.
4 Tap Donetoconrm.