Philips SW100M - Update Software

20 EN
Update software
To improve product performance, Philips may
offer you new software for you to update your
audio adapter.
Warning
• Always connect your audio adapter to AC power for
rmwareupgrade.Neverpoweroffyouraudioadapter
norclosetheappduringrmwareupgrade.
1 Make sure that audio adapter is powered
on and connected to the same Wi-Fi
network as your smartphone or tablet.
2 Make sure that your home Wi-Fi network
is connected to the Internet.
3 Run SpeakerSet on your iOS or Android
smartphone or tablet.
4 Tap the image of the audio adapter to see
the available options.
5 Tap Software update to enter the software
update page.
6 Tap Check online to see whether any new
version of software is available.
7 If a new version is available, tap Update to
start software update.
» The system status indicator on the
front panel blinks amber and red
alternately during this process.
8 Wait until the software update process
nishes,thentapOK to reboot the audio
adapter.
Tip
• Depending on the network connection, it may take 10
minutestonishupdate.