6
2 Your Soundbar
Congratulations on your purchase, and welcome
to Philips! To fully benefit from the support
that Philips oers, register your Soundbar at
www.philips.com/support.
Main unit
This section includes an overview of the main
unit.
Remote Control Sensor
Soundbar’s LED indicator
Switch the playback source and the front
indicator lights up accordingly. You may
refer to the text on the right for the
corresponding source.
Status
LED State
Standby [Standby] Solid red
AUX [AUX/USB] Solid white
USB [AUX/USB] Blinking white
BT (Bluetooth)
• Connected
• Connection
[BT] Solid white
[BT] Blinking white
OPTICAL [OPTICAL] Solid white
HDMI ARC [HDMI ARC] Solid white
(Standby-On)
Switch the Soundbar On or to Standby.
(Source)
Select an input source for the Soundbar.
+/- (Volume)
Increase or decrease volume.
Connectors
This section includes an overview of the
connectors available on your Soundbar.
DC 24V
Connect to adapter.
USB
• Audio input from a USB storage device.
• Upgrade software of this product.
AUX
Audio input from, for example, an
MP3 player (3.5mm jack).
IR OUT
IR pass-through cable connector.
OPTICAL
Connect to an optical audio output on the
TV or a digital device.
HDMI ARC
Connect to the HDMI input on the TV.
Wall Bracket Screws
To Next Page
Loading...
