To Next PageTo Next Page
Need help?Do you have a question about the Philips Trilogy Evo Universal and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Device Type | Ventilator |
| Modes | CPAP |
| Display | Color touchscreen |
| Connectivity | Wi-Fi, Bluetooth |
| Tidal Volume Range | 50 to 2000 mL |
| Respiratory Rate | 4 to 60 breaths per minute |
| FiO2 Range | 21 to 100% |
| Voltage | 100 – 240 VAC |
Defines the device's purpose and patient population for invasive/non-invasive ventilation.
Lists conditions where consulting a healthcare professional is advised before noninvasive ventilation.
Details A/C-PC and A/C-VC modes, including settings and settable alarms.
Explains CPAP and PSV modes, including their settings and settable alarms.
Details S/T, SIMV-PC, and SIMV-VC modes with their settings and alarms.
Describes features like Backup Ventilation, Insp Time Min/Max, and Sigh Enable.
Details how to connect the device to AC power and verify power status.
Instructions for installing CBRN, Air-Inlet Foam, and Particulate Filters.
Guides on connecting passive single limb, active PAP, active flow, and dual limb circuits.
Instructions for connecting high-pressure and low-flow oxygen.
Steps to visually inspect, connect, and power on the Trilogy Evo Universal device.
Outlines considerations before placing a patient on the ventilator, including alarm settings.
Details how to view, edit, and add prescriptions and alarm settings.
Instructions on how to start therapy, put the device on standby, or turn it off.
Guides on how to adjust alarm settings within a prescription.
Steps to take when an alarm occurs, including monitoring and silencing.
Procedures for testing circuit disconnection, obstruction, leakage, and O2 alarms.
Detailed instructions for cleaning, disinfecting, and sterilizing the external active exhalation valve.
Steps to reset the device for a new patient, including data clearing and cleaning.
Lists AC power, external battery, detachable battery, and internal battery as power sources.
Instructions for connecting to AC power and verifying its status.
