02.9690.0001 A 15 April 2010 9
CHAPTER 2.
Installation
This chapter contains instructions for installation of the luminaire. It includes connecting power
and data, along with instructions for powering up the luminaire for the first time and addressing
it within your system.
• Power and Data Cabling Requirements
• Installation Procedures
• Powering Up
• Addressing
WARNING: DO NOT connect or disconnect energized power cable at fixture (under load). Turn
off circuit breaker (or completely de-energize circuit) before connecting or disconnecting power
cable at fixture. Power is only removed from the fixture by disconnecting power cable from
source or turning off source circuit breaker.
To Next Page
Loading...
