TROUBLESHOOTING AND MAINTENANCE
A
02.9690.0001 A 15 April 2010 59
n/a Colors (light output) not
matching from luminaire
to luminaire
Color output not match-
ing other VLX Wash fix-
tures operating at same
control settings.
Calibration turned On or Off...
- Check fixture calibration setting. Make sure
calibration is set to same setting (On or Off) as
other fixtures.
- Check dimming curve setting. Make sure
dimming curve selection (Linear or Curve) is
same for all fixtures.
Table A-2: Troubleshooting Chart (Continued)
Message Description Symptom Possible Cause/Remedy
To Next Page
Loading...
