34 Settings
Table of contents
9.2.3 Enabling/disabling the background light
1
In stop mode (start-up screen), press MENU.
2
Press the h / b key to select the display settings menu Ô.
3
Press + / – to select the Backlit function.
4
Press the record key, g, to confirm.
5
Press + / – to select from the following settings: 8s, 20s, On.
6
Press the record key, g, to confirm.
7
Press the j key to exit the menu.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
9.3 Device settings
9.3.1 Set date & time
The date and time entered are saved with each recording as the
recording time.
1
In stop mode (start-up screen), press MENU.
2
Press h / b to select the device settings menu Õ.
3
Press + / – to select the Date/time function.
4
Press the record key, g, to confirm.
5
Press + / – to select the Set time format function.
6
Press the record key, g, to confirm.
7
Press + / – to switch between the 12/24-hour system.
8
Press the record key, g, to confirm.
9
Press + / – to select the Set date function.
10
Press + / – to set the year.
11
Press b.
12
Press + / – to set the month.
To Next Page
Loading...
Need help?
General
