Philips VR200/02 - Automatic Recording from Satellite; Automatic Recording from Satellite Receiver

Automatic recording from a satellite
receiver (SAT RECORDING)
You can only use thisfunction, when you have a satellite
receiver which can controlother equipment by a
’programming’ function.
a Use a scart cable toconnect the scart socket
EXT.2 AV 2 to the scartsocket on the satellitereceiver.
b Put a cassette inthe machine. Switch off withthe
TV/STANDBYm button on the remote control.
c Hold the MONITOR buton on the remote control, until
’SAT.P’ appears on thevideo recorder display.
The video recorder isnow ready to record. The
EXT.2 AV 2 plug controls thestart and the end of the
recording.
DWhen this function is switchedon and the video
recorder is switchedoff, ’x’ appears on thevideo
recorder display.
DIf you want to cancel thisfunction before the
recording has started,you must hold the
MONITOR button until ’SAT.P’ disappears.
DIf you want to cancel thisfunction while a
programme is being recorded,press the
TV/STANDBYm button on the remote control.
15