1
Press the VCR button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
SET CLOCK, then press the F.FWD/B button.
4
Press the STATUS/EXIT button.
SET CLOCK
→ SET CLOCK
DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
SET CLOCK
SET CLOCK
→ DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
SELECT op CHOOSE B
→ PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
TO END PUSH EXIT
16 Daylight-Savings Time
You may program the VCR so its clock will automatically move
forward one hour in April and turn back one hour in October.
Daylight-Savings Time is ON when you receive your VCR. Turn
Daylight-Savings Time ON or OFF by following the steps below.
Before you begin:
● Make sure you have set the clock. Details are on page 15.
3
Press the PLAY/o button or the STOP/p button to select
DAYLIGHT SVG TIME. Then, press the F.FWD/B button
so that OFF (or ON) appears beside DAYLIGHT SVG
TIME.
2-3
4
1
CH. VOL.
To Next Page
Loading...
