38
3. Record type
From the Functions Menu select “Record type”, then press
MENU button to enter Record type Menu, in which there are
five Record types to select: PCM REC&NOISE CUT, PCM REC,
HP REC and SLP REC. If select the PCM recording type, after
PCM recording up to one hour, the device save the record
file automatically, then next recording. See the below related
reference pictures:
5. Voice-activated Recording
This is a practical function of recording, no button operation
is needed. When the function is enabled, in the course of
recording, if no voice is detected, the device will automatically
pause recording after 3 seconds; if voice is detected again, the
device resumes recording. See the below related reference
picture:
6. The Listen In function
After activating the Listen In function, you can connect an
earphone to listen if there’s any sound output. See the Listen in
function setting interface picture as follows:
4. Record lamp
From the Functions Menu select “Record lamp”, then press
MENU button to enter Record lamp Menu. If recording
indicator select Off, Record lamp won’t work anymore. See the
following picture:
PCM REC&NOISE CUT:WAV format,high sound quality, bit
rate: 384kbps.
PCM REC:WAV format,high sound quality, bit rate: 768kbps.
Stereo REC: MP3 format, high sound quality, bit rate: 128kbps.
Long REC: MP3 format, ordinary sound quality, bit rate: 8kbps.
To Next Page
Loading...
