20
English
5.1 Switching to standby/on and
selecting functions
1
When the set is switched on, press STANDBY-
ON/ ECO POWER to switch it to standby
mode (or press y on the remote control)
➜ The Red indicator lights up
➜ Display shows the connected or previously
connected Center
– The screen will remain empty if no Center is
found
➜ The time will be displayed.—:— appears if
you have not set the clock
2 To switch on, press STANDBY-ON/ ECO
POWER on the set
➜ The set switches to the last source selected
➜ The Green indicator lights up
OR
Press the source button on the remote control
(e.g. HD, SOURCE)
3 To select functions, press SOURCE once or
more times (or press HD, SOURCE on the
remote control)
Helpful hint:
– CD/MP3-CD source is only available on the
Center.
5.2 Switching to power-saving
mode
In power-saving mode, the set’s display and Wi-Fi
connection are turned off
1 When the set is on, press and hold STANDBY-
ON/ ECO POWER to switch it to power-
saving mode (or press and hold y on the remote
control).
➜ The Red indicator lights up
➜ The display is switched off
2 To switch on, press STANDBY-ON/ ECO
POWER.
➜ The set switches to the last source selected
Helpful hints:
– In power-saving mode, the networking, sound,
display, language, the tuner presets, and the
volume level (maximum: the moderate level) will be
retained in the set’s memory.
To Next Page
Loading...
