F10
WelcomeEye Connect 2 / Touch / V4
: indicates that the automatic answering function is activated
: indicates that silent mode is activated
: indicates that the memory is full. The oldest photos/videos are replaced with
the new recordings.
A. Monitoring function
1 2 3 4 5
1: To switch to the view of the second intercom panel or camera, or return to the main
menu.
2: To establish voice communication with the intercom panel and hang up.
3: To open the electric strike plate.
4: To open the gate.
5: To take a photo or video in accordance with the settings selected.
B. Intercom function
1 2
Function only valid if an additional monitor is connected and the parameters are set
correctly.
1: To exit the function
2: Allows you to call the other monitors in the family, answer when you receive a call from
another monitor, or hang up.
C. Settings
The settings menu consists of three pages for WelcomeEye Connect and two pages for
WelcomeEye Touch. To switch from one page to the next, simply slide the screen to the
right or left.
Click on to return to the previous menu.
To Next Page
Loading...
