Philips WP3822 - Operating the Water Purifier: Unfiltered Modes and Cleaning; Unfiltered Spray and Stream Modes; Appliance Cleaning Procedures

Note: The display is off when you do not use the water purier and when you
use it at the unltered spray and unltered stream settings.
Unltered spray
Select this setting for washing dishes and other jobs that require a gentle
water ow.
1 Turn the water selection lever until the unltered spray symbol is
aligned with the indicator (Fig. 27).
Do not let water hotter than 50°C run through the water purier at
this setting, as this may damage the water purier.
Unltered stream
Select this setting for a strong water ow.
1 Turn the water selection lever until the unltered stream symbol is
aligned with the indicator (Fig. 23).
Do not let water hotter than 50°C run through the water purier at
this setting as this may damage the water purier.
Cleaning
Never use scouring pads, detergents, abrasive cleaning agents or
aggressive liquids such as thinner, alcohol, petrol or acetone to clean
the appliance. These substances may cause cracking, discolouration or
distortion.
1 Make sure the battery compartment cover is closed properly
before you clean the appliance.
2 Clean the ltered water outlet with a clean toothbrush and wipe
off any contamination with a clean cloth.
Note: Do not use a used toothbrush, as it may transfer bacteria to the water
outlet.
3 Clean the appliance with a moist cloth.
ENGLISH14