Type Direct tap mount
Major lter components Polysulphone hollow-bre membrane, ion
exchanger and granular activated carbon
Initial water ow rate 1.6L/min. (water pressure at 1kgf/cm2,
water temperature at 20°C)
Chlorine reduction
capacity
1,500L (water density at 2ppm)
Turbidity reduction
capacity
1,500L (water turbidity at 2NTU)
Soluble lead, pesticide
(CAT) & VOC (Volatile
Organic Compounds)
reduction capacity
1,500L (water concentration at 0.1mg/l or
less)
Filter lifetime Approximately 3 months at 10L a day
(the actual lifetime depends on the quality
of the local water and the water pressure)
Replacement lter
cartridge
WP3922
Minimum water pressure 0.7kgf/cm² (7 metres of water column/
70kPa)
Maximum water pressure 3.5kgf/cm² (35 metres of water column/
350kPa)
Accessories WP3922 lter cartridge, 8 tap-mounting
adapters, cartridge replacement indicator
Battery lithium CR2032 (3V ,)
Appliance dimensions 112mm x 149mm x 93mm (H x W x D)
Packaging dimensions 140mm x 170mm x 88mm (H x W x D)
ENGLISH 21
To Next Page
Loading...
