Phoenix Contact FL SWITCH 2000 Series - Page 207

Technical data
108997_en_04 PHOENIX CONTACT 207 / 226
Ambient conditions
Degree of protection IP65/IP66/IP67
Protection class III (VDE0106)
Ambient temperature (operation) -40 °C ... 70 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 5 % ... 95 %
Permissible humidity (storage/transport) 5 % ... 95 %
Air pressure (operation) 79 kPa ... 108 kPa up to 2000m above mean sea level (Without
derating)
Air pressure (storage/transport) 79 kPa ... 108 kPa up to 2000m above mean sea level (Without
derating)
Free from substances that could impair the application of
coating
Yes
General data
Mounting type Wall mounting
Type AX Stand-alone
Weight 1150 g
Housing material Zinc die-cast
MAC address table 8k
MTTF 461.15 Years (SN29500 standard, temperature25°C,
operating cycle21%)
MTTF 149.69 Years (SN29500 standard, temperature40°C,
operating cycle34.25%)
MTTF 19.78 Years (SN29500 standard, temperature70°C, operating
cycle100%)
Connection data
Connection method M12 connector (L-coded)
Interface: Ethernet
Number of interfaces 8
Connection method M12 connectors, D-coded
Note on the connection method Auto negotiation and autocrossing
Transmission physics Copper
Transmission speed 10/100 Mbps
Transmission length 100 m (per segment)
Supply voltage
Supply voltage 24 VDC (redundant)
Residual ripple 3.6 V
PP
(within the permitted voltage range)
Supply voltage range 9 VDC ... 57 VDC
Typical current consumption 180 mA (at U
S
= 24VDC and 25°C ambient temperature)