Phoenix Model TIGER MOTH 40 - User Manual

Instruction Manual
Fly the Tiger Moth biplane - Phoenix Model' ARF version makes it economical
and easy! Built from light weight, high - quality balsa. The fiber glass cowl
painted by hand to match the trim scheme. Most part are cut by laser machine.
Computer - designed for easy assembly. Semi - symmetrical clark Y-airfoils and
ailerons on both wings give these scale versions the original's agility. Includes
main and tail gear, wheels, fuel tank, linkage parts set and decals.
Wingspan : 144cm (56.7 in)
Wing Area : 58 dm
2
Length : 112cm (44 in)
Weight approx : 2600 - 2800g (5.7 - 6.2lb)
Radio control : 4 channel / 5 servos
Engine : 2 stroke. 40 class 4 stroke .48 - .53 class
Specification:

Summary

Tiger Moth 40 Specifications

Kit Contents

Tools, Safety, and Aileron Servo Installation

Aileron Control Horns and Linkages

Wing and Stabilizer Assembly

Vertical Stabilizer and Tail Gear Installation

Landing Gear Installation

Engine and Fuel System Setup

Fuselage Servos and Elevator Pushrod

Rudder Pushrod Installation

Throttle Control and Cowl Mounting

Receiver, Battery, and Switch Installation

Wing Installation

Canopy and Model Balancing

Center of Gravity (CG) Location

Specifies the exact location for the center of gravity on the wing.

Lateral Balance, Control Throws, and Pre-Flight

I;C Flight Guidelines

Phoenix Model TIGER MOTH 40 Specifications

General

Radio	4-channel
Servos	4 servos
Electric Motor	Brushless outrunner
Battery	Optional
ESC	Optional