EasyManuals Logo

Phoenix PWB-1535A User Manual

Phoenix PWB-1535A
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
16 / 24
Then place the 100gram or 3.5 Ounce weight that came with the
machine at 12 0’clock on the outside of the rim using the provided
wheel hammer. 100 grams = 3.5 ounces so either weight is ok.
Remember that at anytime you can switch from Grams to Ounces
and back by just pushing the C button.
After placing the weight, close the hood and spin the wheel. The
following screen will appear:
Remove the weight from the outside of the rim. Use your hand to
rotate the tire until all 5 of the lights in the INSIDE UNBALANCE
POINT are on, as shown here:
Then place the 100gram or 3.5 Ounce weight that came with the
machine at 12 0’clock on the inside of the rim using the provided
wheel hammer. 100 grams = 3.5 ounces so either weight is ok.
Remember that at anytime you can switch from Grams to Ounces
and back by just pushing the C button.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Phoenix PWB-1535A and is the answer not in the manual?

Phoenix PWB-1535A Specifications

General IconGeneral
BrandPhoenix
ModelPWB-1535A
CategoryWheel Balancers
LanguageEnglish