Phoenix Auto Equipment
-Address: 2711 East Craig Road Ste #E, North Las Vegas, NV, 89030 United States
- Website: https://www.phoenixautoequipment.com
- Phone: 7025802883
18 / 24
weights on both the inside and outside of the rim. It is not for using
aluminum wheels or stick on weights.
This is an example of balancing a steel wheel:
Start by placing the wheel on the machine and entering the parameters.
Close the hood and spin the wheel. You will see:
Use your hand to rotate the tire until all 5 of the lights in the
OUTSIDE UNBALANCE POINT are on, as shown here:
Then place the 2.25 Ounce weight that came with the machine at 12
0’clock on the outside of the rim using the provided wheel hammer.
After placing the weight, close the hood and spin the wheel. The
following screen will appear:
You have now zeroed out the balance for the outside of the rim.
Use your hand to rotate the tire until all 5 of the lights in the INSIDE
UNBALANCE POINT are on, as shown here:
To Next Page
Loading...
Need help?
General