Phonak CROS - Step 1: Getting to Know Your Phonak CROS Transmitter

17
The following chapter provides step-by-step instructions
on how to use your Phonak CROS system. Please follow
these steps carefully. The handling of all BTE transmitters
is the same. Only the BTE transmitter model Phonak CROS
will be shown. In the drawings, the parts that are
particularly important for each step are shown in green.
Step 1. Getting to know your Phonak CROS transmitter
I The Phonak CROS transmitter only works in
conjunction with a Phonak hearing aid as the
receiver.
Take the Phonak CROS transmitter in your hand and try
out the controls. This will make it easier for you to feel
for and operate the controls later on when wearing the
Phonak CROS system.
4. Step-by-step instructions for using
the Phonak CROS system