27
You have now successfully placed the Phonak CROS
transmitter. Now insert your hearing aid by using
the specic user guide.
You place a left Phonak CROS transmitter in the same
way (marked in blue, see step 5.1)
Step 5.4 Placing a BTE CROS transmitter with a CROS
SlimTube
Before inserting the dome, check that it is correctly
attached to the tube (dome length is completely slided
over the tube). Then follow the instruction in Step 5.3,
as this procedure is identical.
Step 5.5 Inserting the ITE CROS transmitter (all models)
With your right hand, take your Phonak CROS transmitter
for the right ear (red mark, see step 5.1) between your
thumb and forenger (Fig. 5i).
To Next Page
Loading...
Need help?
General
