Introduction
Congratulations on your purchase of one
of the newest FireWire-enabled products
from Phonic, the FireFly 302. Through
the FireFly’s ultra low-noise microphone
input and two line inputs, together with
a FireWire interface, users are able to
digitally transfer their audio to a computer
in high resolution (96 kHz) audio that
meets today’s modern production stan-
dards. Never again will you have to worry
about loss of audio, as the FireFly will be
the only tool you need to transfer those
analog recordings to digital. Light, easy
to use, with no problematical congura-
tion needed, the FireFly certainly shines
when it comes to simplicity and mobility.
Size certainly doesn’t matter, because
big things will come from your FireFly.
We know how eager you are to get
started – wanting to get the product out
of the box and hook it all up is probably
your number one priority right now – but
before you do, we strongly urge you to
take a look through this manual. Inside,
you will nd important facts and gures
on the set up, use and applications of
your brand new FireFly. If you do hap-
pen to be one of the many people who
atly refuse to read user manuals, then
we just urge you to at least glance at
the Instant Setup section. After glancing
at or reading through the manual (we
applaud you if you do read the entire
manual), please store it in a place that
is easy for you to nd, because chances
are there’s something you missed the
rst time around.
Features
● 6 x 6 24-bit / 96 kHz I/O
● 2 x 2analog operation (RCA)
● Digital S/PDIF (coaxial) I/O (PCM)
● Front-panel microphone in (XLR) with
48V phantom power
● Headphone output with dedicated
level control
● Zero-latency hardware direct moni-
toring
● Low-latency ASIO software direct
monitoring
● 1 x 1 16-channel MIDI I/O
● Power on/off indicator LED
● Powered via FireWire bus or DC
power supply
● Two convenient high-bandwidth
FireWire ports
● Easy-to-see sig and clip LED indica-
tors
● Mac and Windows compatible
To Next Page
Loading...