GETTING STARTED
1. Before turning on the power, set the Master out-
put control to the off position.
2. Always turn the power off before connecting or
disconnecting cables.
3. Cleck the AC Voltage before connecting the AC
plug.
4. Do not obstruct the back panel at all for proper
ventilation.
PHONIC CORPORATIONPage 4
INTRODUCTION / FEATURES / GETTING STARTED
POWERPOD408 / POWERRACK408 USER’S MANUAL
INTRODUCTION
Congratulations on your purchase of the Phonic
Powerpod408 and Powerrack408 Powered Mixer.
The Powerpod408 is built into a rugged wooden
cabinet for heavy-duty use. The Powerrack408 is
a rack-mount powered mixer. Both of these two
powered mixers have the same specifications except
as noted in this manual. In order to get the best
performance from your Powerpod408 and
Powerrack408, please read all of this safety and
operation manual before operating the mixers and
keep the manual for future reference.
FEATURES
l 4 mono input channels for a wide range of
Microphone and Line level signals from separate
input sockets
l Built-in 80 watt power amplifier (max. output)
l Built-in Digital Delay
l Super musical 2-band EQ at mono channels
l Record out
l Tape in
To Next Page
Loading...
