９
Preparing and connecting system components
Jumbo frame setup
The download speed may become fast if the Jumbo frame setting is changed. The setting
procedures are as follows.
1.
Press [Windows] key + [R] key on the
keyboard.
Input "ncpa.cpl" on the window displayed and
click [OK] button.
2.
"Network Connections" window is displayed.
Right click [Local Area Connection] or
[Ethernet] used for the camera connection and
select [Property].
3.
"Ethernet Properties" window is displayed.
Click [Configure...] button.
"Property" window according to the network
device is opened.
Find "Jumbo Frame" in "Advanced" tab and
change the setting.
In this time, depending on the network device;
・
The layout of the screen is different.
・
The setting value is different like as 9014KB.
・
There is no Jumbo Frame.
Be aware for above matters.
To Next Page
Loading...
Need help?
General
