Photron FASTCAM Mini GigabitEthernet Interface First Step Guide

２
Preparing and connecting system components
Ⅰ
Device Connections
Standalone type (Mini series)
Controller details
Status LEDs
DC22-32V 55VA
Power connector
Gigabit Ethernet
LAN cable connector
Power on/off SW
Rear panel
Camera body
PC with PFV installed
LAN Cable
(Gigabit Ethernet)
AC power adaptor
AC power cord
DC Cable
Note: The configuration of the AC
power supply unit and cable differs
based on the shipping period or
model.
・ The FASTCAM camera supports 1000BASE-T (Gigabit Ethernet) only.
If your PC supports 10BASE-T or 100BASE-T only, you need to install a 1000BASE-T
interface board or use a switching hub that supports 10BASE-T, 100BASE-T and
1000BASE-T.
Please use an AC cable with a ferrite core.
CAUTION

Photron FASTCAM Mini GigabitEthernet Interface Specifications

General

Brand	Photron
Model	FASTCAM Mini GigabitEthernet Interface
Category	Digital Camera
Language	English