8 Maintenance
The P-843 is maintenance-free.
8.1 Cleaning
Requirements
✓
You have disconnected the P-843 from the electronics.
✓
The P-843 is discharged (p. 22).
Auxiliary Materials Required
■ Soft, lint-free cloth
■ Mild cleaning agent or disinfectant
If you have any questions on the auxiliary materials recommended for the P-843, contact our
customer service department (p. 27).
NOTICE
Short-circuiting due to cleaning fluid penetrating the housing!
Cleaning fluid penetrating the P-843’s housing can short-circuit the actuator and drive
electronics.
► Disconnect the P-843 from the electronics before cleaning.
► Prevent cleaning fluid from penetrating the P-843‘s housing.
NOTICE
Damage due to unsuitable cleaning agents!
Some cleaning agents may cause damage to the P-843.
► Use mild cleaning agents or disinfectants only.
NOTICE
Damage from ultrasonic cleaning!
Ultrasonic cleaning can damage the P-843.
► Do not do any ultrasonic cleaning.
Cleaning the P-843
1. Dampen the cloth with the cleaning agent or disinfectant.
2. Carefully wipe the surfaces of the P-843.
8 MAINTENANCE
P843M0001EN ‒ 2/23/2021
24
M O T I O N | P O S I T I O N I N G
To Next Page
Loading...
