Specification Desc./Quantity
Exhaust muffler Absorption-type exhaust muffler with a 3-way catalytic convert-
er and lambda probe.
Emission regulations EURO 3
Transmission
TRANSMISSION
Specification Desc./Quantity
Transmission Automatic expandable pulley variator with torque server, V-
belt, self-ventilating dry automatic centrifugal clutch and trans-
mission housing with forced-circulation air cooling.
Final reduction Gear reduction unit in oil bath.
Capacities
CAPACITÀ
Specification Desc./Quantity
Engine oil 1.3 l
Transmission oil 250 cm³
Cooling system fluid 1.75 l
Fuel tank (reserve) ~ 10 l (2 l)
Fork oil (quantity per stem) 133 cm³
Electrical system
ELECTRICAL SYSTEM
Specification
Desc./Quantity
Start-up Electric
Ignition Electronic inductive discharge ignition, high efficiency, with
separate HV coil.
Ignition advance α/N three-dimensional map managed by control unit
Spark plug CHAMPION RG 4 PHP
Alternative spark plug -
Battery 12V-12Ah
Generator Alternating current
Frame and suspensions
TELAIO E SOSPENSIONI
Specification
Desc./Quantity
Chassis type Welded tubular steel chassis with stamped sheet reinforce-
ments
Front suspension Hydraulic telescopic fork with advanced wheel pin and Ø 35
mm stem
Front fork max. stroke 104 mm
Rear suspension Two double-acting shock absorbers, adjustable to four posi-
tions at preloading.
Rear shock absorber max. travel 95.5 mm
Characteristics Beverly Tourer 250 i.e.
CHAR - 10
To Next Page