Need help?Do you have a question about the PIAGGIO Beverly Tourer 300 i.e. and is the answer not in the manual?
General| Displacement | 278 cc |
|---|---|
| Transmission | CVT |
| Fuel System | Electronic Fuel Injection |
| Rear Suspension | Dual hydraulic shock absorbers |
| ABS | Yes |
| Width | 780 mm |
| Seat Height | 790 mm |
| Top Speed | 125 km/h |
| Front Tire | 110/70-16 |
| Engine Type | Single cylinder, 4-stroke |
| Front Suspension | Telescopic fork |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Rear Tire | 140/70 |
| Torque | 23 Nm @ 5, 750 rpm |
| Weight | 175 kg (dry) |
Periodic maintenance schedule indicating inspections, cleaning, and replacements by mileage and time.
Solutions for poor engine performance, starting difficulties, excessive oil consumption, and smoke.
Troubleshooting guides for clutch issues, braking system inefficiencies, and brake overheating.
Step-by-step guide for removing and refitting the engine from the vehicle, including exhaust and brake.
Steps for splitting crankcase halves, inspecting crankshaft, and refitting piston and cylinder assembly.
Procedures for cylinder head, camshaft, valves, and timing system removal and refitting.
Procedures for removing/refitting brake callipers, discs, and servicing brake fluid and hoses.
Steps for replacing front and rear brake pads and checking their thickness.
Detailed procedure for bleeding both front and rear brake systems to remove air.
Checks on electrical system, fluid levels, road tests, and static controls before delivery.
To Next Page