PIAGGIO Beverly Tourer 300 i.e. - Wheels and Tyres

Specification Desc./Quantity
Fuel system Electronic injection with Ø 32-mm throttle body and electric fuel
pump.
Cooling Forced coolant circulation system.
Fuel Unleaded petrol (95 RON)
Exhaust silencer Absorption-type exhaust silencer with a 3-way catalytic con-
verter and lambda probe.
Emissions compliance EURO 3
Transmission
TRANSMISSION
Specification Desc./Quantity
Transmission Automatic expandable pulley variator with torque server, V-
belt, self-ventilating dry automatic centrifugal clutch and trans-
mission housing with forced-circulation air cooling.
Final reduction gear Gear reduction unit in oil bath.
Capacities
CAPACITY
Specification Desc./Quantity
Engine oil 1.3 l
Transmission oil 250 cm³
Cooling system fluid 1.75 l
Fuel tank (reserve) 10 l ± 0.5
Fork oil (quantity per stem) 133 cm³
Electrical system
ELECTRICAL SYSTEM
Specification
Desc./Quantity
Starter starter
Ignition Electronic inductive discharge ignition, high efficiency, with
separate HV coil.
Ignition advance α/N three-dimensional map managed by control unit
Spark plug NGK CR8EKB
Alternative spark plug -
Battery 12V-12Ah
Alternator alternating current
Frame and suspensions
WHEELS AND TYRES
Specification
Desc./Quantity
Wheel rim type Light alloy wheel rims.
Front wheel rim 16'' x 3.00
Rear rim 16 x 3.50''
Front tyre Tubeless, 110/70 - 16'' 52P
Rear tyre Tubeless, 140/70 - 16'' 65P
Front tyre pressure (with passenger) 2 bar (-)
Rear tyre pressure (with passenger) 2.2 bar (2.5 bar)
Characteristics Beverly Tourer 300 i.e.
CHAR - 10