Capacity approximately 250 cc
Locking torques (N*m)
Hub oil drainage screw 15 to 17 Nm
Air filter
To reach the air filter:
- Undo the nine screws «A».
- Remove the air-box cover «B»
Cleaning:
- Wash the sponge with water and mild soap.
- Dry it with a clean cloth and short blasts of com-
pressed air.
- Soak it in a mixture of 50% petrol and 50% speci-
fied oil.
- Gently squeeze the filtering element with your
hands but do not wring it; allow it to drip dry and
then refit.
CAUTION
IF THE VEHICLE IS USED ON DUSTY ROADS IT IS NEC-
ESSARY TO CARRY OUT MAINTENANCE CHECKS OF
THE AIR FILTER MORE OFTEN TO AVOID DAMAGING THE
ENGINE.
Recommended products
AGIP FILTER OIL Oil for air filter sponge
Mineral oil with specific additives for increased ad-
hesiveness
Beverly Tourer 300 i.e. Maintenance
MAIN - 45
To Next Page
Loading...
